So you should care about your products as well
Making sure your purchase is well looked after is going to ensure that you get the most out of it. In this section we'll let you know exactly how to care for your specific garment & how to make it last.
Want to know how to take care of your fresh garments? Here's how.
-
All of our t-shirts are 100% cotton. This means if you use high heat in a washer & dryer they will have some amount of shrinkage even on our garment dyed garments. Our T-Shirts run slightly oversized so please refer to the size chart on the product page. We don't advise sizing up unless you want a very oversized tee.
- Machine wash on 30°C or lower
- Wash inside out
- Avoid tumble drying to minimize shrinkage
- Avoid ironing directly on printed areas
- Hang dry
-
The majority of our hoodies consist of a 75/25% Cotton/Poly blend that we manufactered from scratch. We chose a 400GSM material so it's not too heavy for cooler summer nights as well as deep winter. Our hoodies run slightly oversized so please refer to the size chart on the product page. We don't advise sizing up unless you want a very oversized garment.
- Machine wash on 30°C or lower
- Wash inside out
- Avoid tumble drying to minimize shrinkage
- Avoid ironing directly on printed areas
- Hang dry
-
Our knitwear is 100% Cotton that we manufactered from scratch. We chose a 100% cotton instead of wool for these as it is a bit more breathable while remaining a heavy garment. Perfect for the cooler summer nights as well as deep winter. Our knitwear jumpers run very, very oversized so please refer to the size chart on the product page. We don't advise sizing up unless & you would be safe to size down as knitwear is very pliable.
- Hand wash is preferred.
- DO NOT scrub
- Machine wash on 30°C or lower (Second option)
- DO NOT use bleach
- DO NOT tumble dry
- DO NOT Iron
- Avoid Hanging the garment from the shoulders as it may leave indentation.
Sticker application is a simple yet sometimes difficult thing! With diecuts (especially specialty finishes like oil slick & sparkle)
you'll need to be extremely careful to make the the sticker stick to the transfer paper. Unfortunately we're not liable for any
damage to the product during installation. With that being said we've created a guide to make it a little easier if you're
having some issues with installation.